Unifiber Essentials SDM 50% Constant curve mast

Unifiber Essentials SDM Constant curve  mast

De Unifiber Essentials SDM 50% Constantcurve mast heeft 50% carbon  mast is 2-delig en werkt perfect op diverse surf zeil merken waaronder;

- Neil Pryde
- Severne
- KA Sails
- Ezzy sails
- Gun sails
- Loft sails
-Maui sails

Heb je nog vragen over de juiste keus van je mast bel ons dan even 073-5212787

 

IMCS: this represents the average stiffness of the mastThe bend characteristics of a mast is defined by four variables:

• Base%: this defines the deflection at the base (relative to the midpoint)

• Top%: this defines the deflection at the top (relative to the midpoint)

• Bend Curve Number: this number - in an approximate way - describes the mast curve. It is calculated by subtracting the Base% from Top%.

• Constant Curve- This is the most commonly used curve profile
  
  
  • Base%: 62,5%
  
  
  • Top%: 76%
  
  
  • BC number: 13,5
  
  
  

• Constant FL Curve- This is similar to the old "flex top" mast, but with more flex low down (around the centre) of the mast. FL = Flex Low.
  
  
  • Base%: 62%
  
  
  • Top%: 77%
  
  
  • BC number: 15
  
  
  

• Constant FH Curve- This is also similar to the old "flex top" mast, but there is more flex high up. The centre section is relatively stiff. FH = Flex High.
  
  
  • Base%: 64% for RDM, 63% for SDM
  
  
  • Top%: 79% for RDM, 78% for SDM
  
  
  • BC number: 15
  
  
  

 



 

[embed]https://youtu.be/NPRjwEtXij8[/embed]